Referencia de API para desarrolladores

Empezando Autenticación Límite de tarifa Manejo de respuestas

Referencia de API para desarrolladores

Empezando

Se requiere una clave API para que el sistema procese las solicitudes. Una vez que un usuario se registra, se genera automáticamente una clave API para este usuario. La clave API debe enviarse con cada solicitud (consulte el ejemplo completo a continuación). Si la clave API no se envía o está caducada, habrá un error. Asegúrese de mantener su clave API en secreto para evitar abusos.

Autenticación

Para autenticarse con el sistema API, debe enviar su clave API como token de autorización con cada solicitud. Puede ver el código de muestra a continuación.

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
));

$response = curl_exec($curl);

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Límite de tarifa

Nuestra API tiene un limitador de velocidad para protegernos contra aumentos en las solicitudes y maximizar su estabilidad. Nuestro limitador de velocidad actualmente tiene un límite de 30 solicitudes por 1 minuto. Tenga en cuenta que la tarifa puede cambiar según el plan suscrito.

Se enviarán varios encabezados junto con la respuesta y estos se pueden examinar para determinar información diversa sobre la solicitud.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP

Manejo de respuestas

Todas las respuestas de la API se devuelven en formato JSON de forma predeterminada. Para convertir esto en datos utilizables, será necesario utilizar la función adecuada según el idioma. En PHP, la función json_decode() se puede utilizar para convertir los datos en un objeto (predeterminado) o en una matriz (establezca el segundo parámetro en verdadero). Es muy importante comprobar la clave de error ya que proporciona información sobre si hubo un error o no. También puede consultar el código del encabezado.

{
    "error": 1,
    "message": "An error occurred"
}

Account

Get Account

GET https://cutly.es/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "data": {
        "id": 1,
        "email": "sample@domain.com",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}

Update Account

PUT https://cutly.es/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "newemail@google.com",
    "password": "newpassword"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "email": "newemail@google.com",
	    "password": "newpassword"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "newemail@google.com",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Account has been successfully updated."
}

Campañas

List Campaigns

GET https://cutly.es/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}

Crear una campaña

POST https://cutly.es/api/campaign/add

A campaign can be added using this endpoint.

Parámetro	Descripción
name	(optional) Campaign name
slug	(optional) Rotator Slug
public	(optional) Access

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Campaign",
	    "slug": "new-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}

Assign a Link to a Campaign

POST https://cutly.es/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Link successfully added to the campaign."
}

Campaña de actualización

PUT https://cutly.es/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(required) Campaign name
slug	(optional) Rotator Slug
public	(optional) Access

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Twitter Campaign",
	    "slug": "twitter-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}

Delete Campaign

DELETE https://cutly.es/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://cutly.es/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://cutly.es/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Canales

List Channels

GET https://cutly.es/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}

List Channel Items

GET https://cutly.es/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/cutly.es\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/cutly.es\/mybio",
                "link": "https:\/\/cutly.es\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}

Crear un canal

POST https://cutly.es/api/channel/add

A channel can be added using this endpoint.

Parámetro	Descripción
name	(required) Channel name
description	(optional) Channel description
color	(optional) Channel badge color (HEX)
starred	(optional) Star the channel or not (true or false)

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Channel",
	    "description": "my new channel",
	    "color": "#000000",
	    "starred": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}

Assign an Item to a Channel

POST https://cutly.es/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

Parámetro	Descripción
:channelid	(required) Channel ID
:type	(required) links or bio or qr
:itemid	(required) Item ID

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Item successfully added to the channel."
}

Canal de actualización

PUT https://cutly.es/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(optional) Channel name
description	(optional) Channel description
color	(optional) Channel badge color (HEX)
starred	(optional) Star the channel or not (true or false)

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Acme Corp",
	    "description": "channel for items for Acme Corp",
	    "color": "#FFFFFF",
	    "starred": false
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Channel has been updated successfully."
}

Delete Channel

DELETE https://cutly.es/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

cURL PHP Node.js

curl --location --request DELETE 'https://cutly.es/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://cutly.es/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

Códigos QR

List QR codes

GET https://cutly.es/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/cutly.es\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/cutly.es\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a single QR Code

GET https://cutly.es/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/cutly.es\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}

Create a QR Code

POST https://cutly.es/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
type	(required) text \| vcard \| link \| email \| phone \| sms \| wifi
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "link": "https:\/\/cutly.es\/qr\/a58f79"
}

Update QR Code

PUT https://cutly.es/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "QR has been updated successfully."
}

Delete a QR Code

DELETE https://cutly.es/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://cutly.es/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://cutly.es/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Dominios de marca

List Branded Domains

GET https://cutly.es/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}

Create a Branded Domain

POST https://cutly.es/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

Parámetro	Descripción
domain	(required) Branded domain including http or https
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "domain": "https:\/\/domain1.com",
	    "redirectroot": "https:\/\/rootdomain.com",
	    "redirect404": "https:\/\/rootdomain.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1
}

Actualizar dominio

PUT https://cutly.es/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "redirectroot": "https:\/\/rootdomain-new.com",
	    "redirect404": "https:\/\/rootdomain-new.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Domain has been updated successfully."
}

Delete Domain

DELETE https://cutly.es/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://cutly.es/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://cutly.es/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Enlaces

List Links

GET https://cutly.es/api/urls?limit=2&page=1&order=date

To get your links via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request
order	(optional) Sort data between date or click
short	(optional) Search using the short url. Note that when you use the short parameter, all other parameters are ignored and if there is a match a Single Link response will be returned.

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/urls?limit=2&page=1&order=date",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/urls?limit=2&page=1&order=date',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "urls": [
            {
                "id": 2,
                "alias": "google",
                "shorturl": "https:\/\/cutly.es\/google",
                "longurl": "https:\/\/google.com",
                "clicks": 0,
                "title": "Google",
                "description": "",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "alias": "googlecanada",
                "shorturl": "https:\/\/cutly.es\/googlecanada",
                "longurl": "https:\/\/google.ca",
                "clicks": 0,
                "title": "Google Canada",
                "description": "",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a Single Link

GET https://cutly.es/api/url/:id

To get details for a single link via the API, you can use this endpoint.

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/url/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/url/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1,
    "details": {
        "id": 1,
        "shorturl": "https:\/\/cutly.es\/googlecanada",
        "longurl": "https:\/\/google.com",
        "title": "Google",
        "description": "",
        "location": {
            "canada": "https:\/\/google.ca",
            "united states": "https:\/\/google.us"
        },
        "device": {
            "iphone": "https:\/\/google.com",
            "android": "https:\/\/google.com"
        },
        "expiry": null,
        "date": "2020-11-10 18:01:43"
    },
    "data": {
        "clicks": 0,
        "uniqueClicks": 0,
        "topCountries": 0,
        "topReferrers": 0,
        "topBrowsers": 0,
        "topOs": 0,
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "google": 0
        }
    }
}

Shorten a Link

POST https://cutly.es/api/url/add

To shorten a link, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
languagetarget	(optional) Language targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description
metaimage	(optional) Link to a jpg or png image
description	(optional) Note or description
pixels	(optional) Array of pixel ids
channel	(optional) Channel ID
deeplink	(optional) Object containing app store links. When using this, it is important to set device targeting as well.
status	(optional) public or private (default)

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "status": "private",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "metatitle": "Not Google",
    "metadescription": "Not Google description",
    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
    "description": "For facebook",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "deeplink": {
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "languagetarget": [
        {
            "language": "en",
            "link": "https:\/\/google.com"
        },
        {
            "language": "fr",
            "link": "https:\/\/google.ca"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "url": "https:\/\/google.com",
	    "status": "private",
	    "custom": "google",
	    "password": "mypass",
	    "expiry": "2020-11-11 12:00:00",
	    "type": "splash",
	    "metatitle": "Not Google",
	    "metadescription": "Not Google description",
	    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
	    "description": "For facebook",
	    "pixels": [
	        1,
	        2,
	        3,
	        4
	    ],
	    "channel": 1,
	    "deeplink": {
	        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
	        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
	    },
	    "geotarget": [
	        {
	            "location": "Canada",
	            "link": "https:\/\/google.ca"
	        },
	        {
	            "location": "United States",
	            "link": "https:\/\/google.us"
	        }
	    ],
	    "devicetarget": [
	        {
	            "device": "iPhone",
	            "link": "https:\/\/google.com"
	        },
	        {
	            "device": "Android",
	            "link": "https:\/\/google.com"
	        }
	    ],
	    "languagetarget": [
	        {
	            "language": "en",
	            "link": "https:\/\/google.com"
	        },
	        {
	            "language": "fr",
	            "link": "https:\/\/google.ca"
	        }
	    ],
	    "parameters": [
	        {
	            "name": "aff",
	            "value": "3"
	        },
	        {
	            "device": "gtm_source",
	            "link": "api"
	        }
	    ]
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/url/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "url": "https:\/\/google.com",
    "status": "private",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "metatitle": "Not Google",
    "metadescription": "Not Google description",
    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
    "description": "For facebook",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "deeplink": {
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "languagetarget": [
        {
            "language": "en",
            "link": "https:\/\/google.com"
        },
        {
            "language": "fr",
            "link": "https:\/\/google.ca"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "shorturl": "https:\/\/cutly.es\/google"
}

Enlace de actualización

PUT https://cutly.es/api/url/:id/update

To update a link, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash]
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
languagetarget	(optional) Language targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description
metaimage	(optional) Link to a jpg or png image
pixels	(optional) Array of pixel ids
channel	(optional) Channel ID
deeplink	(optional) Object containing app store links. When using this, it is important to set device targeting as well.

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "deeplink": {
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/url/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "url": "https:\/\/google.com",
	    "custom": "google",
	    "password": "mypass",
	    "expiry": "2020-11-11 12:00:00",
	    "type": "splash",
	    "pixels": [
	        1,
	        2,
	        3,
	        4
	    ],
	    "channel": 1,
	    "deeplink": {
	        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
	        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
	    },
	    "geotarget": [
	        {
	            "location": "Canada",
	            "link": "https:\/\/google.ca"
	        },
	        {
	            "location": "United States",
	            "link": "https:\/\/google.us"
	        }
	    ],
	    "devicetarget": [
	        {
	            "device": "iPhone",
	            "link": "https:\/\/google.com"
	        },
	        {
	            "device": "Android",
	            "link": "https:\/\/google.com"
	        }
	    ],
	    "parameters": [
	        {
	            "name": "aff",
	            "value": "3"
	        },
	        {
	            "device": "gtm_source",
	            "link": "api"
	        }
	    ]
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/url/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "deeplink": {
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "short": "https:\/\/cutly.es\/google"
}

Delete a Link

DELETE https://cutly.es/api/url/:id/delete

To delete a link, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://cutly.es/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/url/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://cutly.es/api/url/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Link has been deleted successfully"
}

Píxeles

List Pixels

GET https://cutly.es/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Create a Pixel

POST https://cutly.es/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

Parámetro	Descripción
type	(required) gtmpixel \| gapixel \| fbpixel \| adwordspixel \| linkedinpixel \| twitterpixel \| adrollpixel \| quorapixel \| pinterest \| bing \| snapchat \| reddit \| tiktok
name	(required) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP Node.js

curl --location --request POST 'https://cutly.es/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "gtmpixel",
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://cutly.es/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1
}

Actualizar píxel

PUT https://cutly.es/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(optional) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP Node.js

curl --location --request PUT 'https://cutly.es/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://cutly.es/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Pixel has been updated successfully."
}

Delete Pixel

DELETE https://cutly.es/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://cutly.es/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://cutly.es/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

Salpicadura personalizada

List Custom Splash

GET https://cutly.es/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Superposiciones de CTA

List CTA Overlays

GET https://cutly.es/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://cutly.es/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://cutly.es/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://cutly.es/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}